Carryout GM1518 Does Not Detect Signal

[Winegard Tech Help]

Nathan,

You'll want to avoid using an H25, HR25 or HR34.

You need to run the coax cable directly from the receiver to the antenna and configure the receiver per this document: http://www.winegard.com/kbase/upload/re ... irectv.pdf

If the receiver you're using is a dual tuner (with two inputs on the back), you'll need to either run two cables to use it as a dual tuner, or run one cable and specify it to be a single tuner by changing the tuners option from dual to single on the system setup screen (which you'll change your dish type and switch type on as per the above document).