Model VS-0604/VS-6412 12 VDC Connector

[waypeg65]

I have a model VS-0604/VS6412 distribution Switch. The two wires on the 12 VDC white locking connector came out and I do not know which is (+) positive and (-) negative on the locking connecor. Which Side of the connector is positive and which side is negative when the locking tab is up ?

[Winegard Tech Help]

waypeg65,

Use this picture as a reference: http://www.summitsource.com/images/products/CA0050.jpg

[waypeg65]

I can not open the picture.

[Winegard Tech Help]

waypeg65,

Does this help?

[waypeg65]

No Help. Can not Open. No response when I clip on icon.

[waypeg65]

Today I was at a RV dealer and they had a Quest Distribution Switch with the same type of 12 VDC connector as the Winegard. With the Locking tab up a blue wire was connected on the left and a red wire was connected on the right. Is this the same as the Winegard connection ?

[Winegard Tech Help]

waypeg65,

I would think that would indicate correctly but with a blue jacket on the ground wire and a red jacket on the wire.

[Bill Adams]

Here's the wiring. The center connection is not used. The tab is at the top.

[Winegard Tech Help]

Thanks for the picture Bill. I was trying to locate one of the VS pigtails to do the same but we didn't have any in our building and getting one over would take a day or so.