I have two Hi-VHF/UHF antennas pointed in opposite directions. One antenna (HD7696P) to stations to the south 20 miles away, the other antenna, a very high-gain one, to stations to the north 25 miles (VHF & UHF) and 60 miles (UHF) away.
I would like to use a preamp setup to amplify the signal of only the antenna pointed to the north, but not of the antenna pointed to the south (as it is not needed). Furthermore, I would like to connect both of these antennas to 2 separate HD Digital TVs. I would like the preamp's power unit(s) to be next to the TVs.
Can someone help me with this? If both TVs cannot have amplified signals, then I would like this unamplified TV to at least be able to receive the signals from the unamplified antenna (pointed south).