Old RV-3090 Sensar

[1bob2shep]

We have an old RV-3090 Sensar antenna. When we try to receive digital signals, all we can get is channel 11.1 which is broadcast on RF channel 10. None of the UHF channels are able to be received. When we use a indoor rabbit ear DTV antenna, we can get about 5 more of the channels on UHF but not the VHF one we did with the Sensar...it appears that the Sensar is only receiving VHF signals and not passing UHF to the TV.
Is this a possibility? Do we need a new head (RV-2005) to the antenna system?
(We are in zip code 30286)

[Winegard-Mobiletech]

Are you able to check the voltage going to the antenna head?

There should be 12VDC on the coax that powers the amplifier built into the antenna. If this voltage is missing you might have a bad piece of cable somewhere in the antenna system. If you have the voltage, its likely that you need a new antenna head.

[1bob2shep]

yep----we have 12V...
I saw somewhere that the RV-2005 was discontinued....
What is the proper head I should order?

[Winegard-Mobiletech]

The RV-2005 is the current replacement.

Before that it was the RV2001A further back it was the RV-2001...

they are all basically the same.

[1bob2shep]

Thanks!!