SK3005 with Swm/

[beliveauj]

I have a slimline dish with the one cable swm.I have a SK3005 coming this week and can i change the lbn's or what is the best way to hook up for only one DVR HR24.Thanks Jim

[Winegard Tech Help]

Jim,

You will not want to change the LNB on the antenna as it will not be able to search and lock on with a SWM LNB.

With an HR24, you do not need to go to SWM but can if you would like.

For the non-SWM setup, just run two coax cables from the antenna to the receiver and install B-Band converters on both tuners and follow the receiver configuration to set the receiver up: http://www.winegard.com/kbase/upload/re ... irectv.pdf

For the SWM setup, you will need our SWM-840 kit (retail $169.99) and to follow the diagram shown on page three of this document: http://www.winegard.com/kbase/upload/2452242.pdf

If you have further questions, please let me know.

[beliveauj]

Thank you for the info.Jim