signal detector

[Durwood Hunter]

Good morning, trying to set up a system for my rv using a
signal meter. As soon as I power up the receiver the meter
tone comes on and stays on no matter where the
dish is pointing then after a minute stops. The 22khz light
does not come on. This is my first time out with satellite
tv so I bet I'm doing something wrong! Thanks for any
advice, Woody

[Winegard - CSCHL]

Turn the knob on the satellite finder so the needle is pointed at 0. Barely turn the knob to the right until the needle is at 2-4 then aim the dish. Once the needle goes to 10 turn it back down to 2-4 and make it jump to 10 a couple more times.