hooking up a dig con box

[stevepat]

what is the correct way to tie in a DCB to my RV, i have a VS0503/5312 switch, i want to do this the easiest way and only on the front TV, can I hook into this switch or do i have to go to the back of the TV and if i have to go to the back can I splice into a wire instead of removing the TV and if so can you send me a diagram on what wire it might be. thanks
i have a 2006 itasca suncruiser

[Winegard-Mobiletech]

Here are some diagrams to help. Please let me know if you have any questions that this does not answer.

[stevepat]

i looked at the diagrams, still confused, there are 5 co ax cables going into this box and i'm not sure which is which, do you have a diagram of the VS 0503/5312

[Winegard-Mobiletech]

All of the video switches are pretty much the same.

The converter box will only output one channel at a time so the best way to install it is between the video switch and the TV. Otherwise, since you can't use the video switch to power your antenna AND run the converter through it you will need a separate power supply for your antenna.