Winegard Company Mobile and HDTV Antennas

Home | Contact Us | Account | Basket | Checkout

Medical Telemetry

Biotelemetry antennas,
power supplies, amplifiers
and other related products

Winegard has designed and tooled 11 different reflector sizes. All reflectors are manufactured from galvanized steel and finished with a five-step, textured thermoset powder coat. A hydrophobic agent added to the finish increases water and snow repellent action. Mounts are manufactured from galvanized steel and E-Coated for maximum protection.

All hardware has a JS corrosion resistant finish. Feed support systems are available for most popular LNBFs. Our satellite antennas have Winegard's limited five year warranty. *LNB not included. Mount/bracket included in specified models.

TLS-600 Medical Telemetry Antenna
Winegard's medical telemetry antenna, TLS-600, offers outstanding performance in an attractive rugged plastic housing.

Designed for optimum performance on WMTS band, (Wireless Medical Telemetry Service) TLS-600 has red/green visible LEDs to indicate voltage present on the cable.

TLS-600
Manual

Spec Sheet

TL-6025 Medical Telemetry Antenna
Omnidirectional antenna designed to receive biotelemetry signals in the 600 to 620 MHz frequency range.

Extends range of receivers, eliminates false alarms and signal dropouts. Installs in remote areas of rooms or hallways.

TL-6025
Manual

Spec Sheet

TAC-616 Amplified Combiner
Certified medical telemetry combiner for use in the WMTS band of 608-614 MHz. It cannot be used as a splitter. It has four inputs for connection to antennas and line amplifiers and a single output port. All RF ports are DC passive, with a PTC device at each input port to limit the DC current from the output to any input.

An LED indicator shows correct DC current from the output to any input. Other features included for high signal integrity are a high selectivity bandpass using a SAW filter, high input to input isolation, low noise figure and high signal handling.

Spec Sheet

PS-2493 Power Supply
117 VAC supplies a regulated +24 VDC to 75 ohm coax line for operation of line amplifiers. Supplies up to 0.5 amp at 24 VDC to the input connector and passes RF frequencies from 5 to 1000 MHz between input and output with a maximum of .5 dB insertion loss. DC power blocked to the output connector

PS-2493 Manual

Spec Sheet

LS-475F Medical Telemetry Splitter
Four way line splitter.

Spec Sheet

LS-0275 Two-Way Line Splitter - BNC Connectors (VHF/UHF/FM)
Divides signals from single 75 ohm coaxial line into two trunk lines. Input and output 75 ohm unbalanced type; connectors are BNC-type for RG-6/U, RG-59/U or RG-11/U cable.

LS-0475 Four-Way Line Splitter - BNC Connectors (VHF/UHF/FM)
Divides signals from single 75 ohm coaxial line into four trunk lines. Input and output are 75 ohm unbalanced type; connectors are BNC-type for RG-6/U, RG-59/U or RG-11/U cable.

TA-1626 Line Amplifier
Line amplifiers for biotelemetry antennas are located in remote areas requiring long cable runs to receivers. Line powered with nominal +14 to 24 VDC applied to antenna cable.Tuned to bandpass 602-626 MHz with 19 dB gain. Connectors standard F-type 75 ohm.

TA-1626 Manual

Spec Sheet